182 '.' charcters follows '@' character immediately!
183 '.' character at the end of email address!
184 Non 7-bit character in email address!
185 Two consecutive '.' characters in email address!
186 No '.' character in email address after '@' character!
187 No mailbox in email address!
188 '@' character in mailbox!
189 '.' character at the end of the mailbox!
190 '@' character in domain!
191 No domain in email address!
192 No email address!
193 Invalid wildcard mailbox!
194 Invalid wildcard domain!
195 .
5000 Workgroup does not exist! Get the system administrator to make one.
5001 Failed to load workgroup from the database!
5002 Failed to load users from the database!
5003 Failed to bind to address %s on port %d
5004 You must supply a password of six characters or more!
5005 The keycode you have supplied is incorrect!
5006 Failed to load attachments from the database!
5007 Failed to add attachment to the database!
5008 Failed to load recipients from the database!
5009 Failed to add recipient to the database!
5010 Failed to load messages from the database!
5011 Failed to add message to the database!
5012 Failed to delete attachments from the database!
5013 Failed to delete recipients from the database!
5014 Failed to open workgroup table!
5015 Failed to open user table!
5016 Failed to open sent messages table!
5017 Failed to open recipients table!
5018 Failed to open received messages table!
5019 Failed to load received messages from the database!
5020 Failed to load received recipients from the database!
5021 Failed to open received recipients table!
5022 Failed to open attachments table!
5023 Failed to open recipients table!
5024 Failed to open messages table!
5025 Failed to save recipient '%1' to the database!
5026 Failed to add event log to the database!
5027 Failed to load event logs from the database!
5028 Failed to delete event logs from the database!
5029 Failed to load domain names from the database!
5030 Failed to add domain name to the database!
5031 Failed to save domain name '%1' to the database!
5032 Failed to delete domain name '%1' from the database!
5033 Failed to save the user '%1' to the database!
5034 Failed to add the user '%1' to the database!
5035 Failed to delete the user '%1' from the database!
5036 Failed to delete the message from the database!
5037 Failed to save attachment to file '%1'!
5038 Failed to load attachment from file '%1'!
5039 %1 cannot be sent to. The reply given by the service provider was '%2'.\n-----------------------------------------------------\n
5040 %1 cannot be sent to. This may be a temporary problem. The message will be automatically resent later on. The reply given by the service provider was '%2'.
5041 The error given by the service provider is '%1'.
5042 Recipient '%1' in message '%2'
5043 The message %1
5044 '%1', sent by '%2'
5045 %1 could not be sent to '%2'.
5046 Failed Mail
5047 System Administrator
5048 The computer is not receiving a response from the modem.\nCheck that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
5049 Could not save the file '%1'!
5050 Could not load the file '%1'!
5051 Failed to connect to the dial-up service '%1'!
5052 Failed to get dial-up information for the service '%1'!
5053 Failed to get existing dial-up connections!
5054 Failed to hang up!
5055 Failed to open file '%1' for writing!
5056 Failed to close file '%1'!
5057 Failed to write to file '%1'!
5058 Failed to save password!
5059 The modem is being used by another Dial-Up Networking connection or another program. Disconnect the other connection or close the program and then try again again.
5060 Connecting to %1
5061 Failed to connect to the POP3 server '%1'! Please check that you have entered a valid user name and password.
5062 Failed to connect to the server! The server may not be responding.
5063 Connection opened
5064 Connection closed
5065 Windows Sockets: not initialized!
5066 Windows Sockets: network down!
5067 Windows Sockets: address in use!
5068 Windows Sockets: fault!
5069 Windows Sockets: in progress!
5070 Windows Sockets: address family not supported!
5071 Windows Sockets: invalid!
5072 Windows Sockets: no buffers!
5073 Windows Sockets: not socket!
5074 Windows Sockets: no more file handles!
5075 Windows Sockets: port not supported!
5076 Windows Sockets: wrong port type!
5077 Windows Sockets: socket type not supported!
5078 Windows Sockets: unknown error!
5079 Failed to send the message '%1'!
5080 Failed to receive the message '%1'!
5081 Failed to load received attachment '%1'!
5082 Failed to load received message from the database!
5083 Failed to load sent messages from database!
5084 Failed to load messages from the database!
5085 POP3 socket forced state to idle and reset server
5086 POP3 socket forced state to reset
5087 Non-last line received
5088 POP3 deliberately not reconnecting - not in idle
5089 Failed to load received binary messages!
5090 POP3 Connection failed
5091 Failed to save attachment '%1' to database!
5092 Failed to connect to the dial-up service: %1!
5093 Port already open!
5094 Disconnection occurred!
5095 Remote disconnection occurred!
5096 Port not available!
5097 Line busy!
5098 Voice answer!
5099 No answer!
5100 No carrier!
5101 No dialtone!
5102 Authentication failure!
5103 Bad phone number!
5104 Failed to open attachments table!
5105 Failed to save message '%1' to database!
5106 Failed to load message data from database!
5107 Failed to open received message data table!
5108 Failed to receive message data!
5109 The SMTP server rejected the message '%1' due to an incorrect From: field. The reply given by the service provider was '%2'.\n-----------------------------------------------------\n
5110 There was a problem reading or writing temporary files during processing of messages. Please ensure that there is sufficient disk space.
5111 Problems were encountered during the reception of a message. Please ensure that the gateway computer has sufficient disk space and resources.
5112 Problems were encountered during the communication with the server. Please ensure that the gateway computer has sufficient disk space and resources.
5113 Failed to write data during the encode/decode process. Please ensure that the gateway computer has sufficient disk space and resources.
5114 You have run out of disk space. The current operation will not be completed properly. Shut down the application, free up some space and try again.
5116 Decoding message...
5117 Decoding message '%s'
5118 Accepted connection from '%s'
5119 Status: Initialising Modem...
5120 Status: Dialing...
5121 Status: Verifying user name and password...
5122 Decoding received attachments
5123 Idle
5124 Disconnect while busy?
5125 Committing changes to database
5126 Reading data from database...
5127 [%s] Received message (%d of %d)
5128 Received local message
5129 Received message
5130 Failed to send (error %1)!
5131 Not Connected
5132 Submitting message
5133 Checking for messages to send
5134 Adding received data to database
5135 Checking for new received messages
5136 Encoding attachments
5137 Extracting messages from received data
5138 Start
5139 Stop
5140 %s logging RX messages
5141 %s logging TX messages
5142 %s logging responses
5143 %s logging forwarding
5144 SENDING: attempting to add message '%s' to database
5145 SENT: successfully added message '%s' to database
5146 SEND FAILED: failed to add message '%s' to database
5147 Failed to connect to the SMTP server '%1' in order to send mail! The server may not be responding.
5148 Failed to connect to the POP3 server in order to receive mail! The server may not be responding.
5149 Failed to open sent recipients table!
5150 Failed to load sent recipients!
5151 Cannot create new dial-up connection! Make sure that dial-up networking is installed properly on this machine.
5152 Failed to get dial-up services!
5153 Memory error while trying to get dial-up services!
5154 New dial-up service is not available on this operating system!
5155 Dial-up service properties is not available on this operating system!
5156 Problems were encountered during the download of a message header.
5157 Writing attachment data
5158 Writing data to database
5159 Committing changes to database
5160 Fingered SMTP Server
5161 Latched on to existing connection
5162 Connecting to host...
5163 Connected to host!
5164 Compressing data...
5165 Successful compression to %d%% of original size!
5166 Decompressing attachment...
5167 Finished decompressing attachment!
5168 Writing encoded attachment to database
5169 Writing decoded attachment to database
5170 Reading data from database
5171 Encoding attachment %1
5172 Finished encoding attachment %1
5173 Decoding attachment %1
5174 Finished decoding attachment %1
5175 Encoding %1
5176 Decoding...
5177 Connected to POP3 client, ready to send
5178 Connected to POP3 Server [%1]
5179 Connected to POP3 server, ready to receive
5180 Talking to POP3 client...
5181 Sending local message '%1'
5182 Talking to POP3 server...
5183 [%1] Possible error or no messages waiting at POP3 server
5184 [%1] %2 messages waiting at POP3 server
5185 [%1] No messages waiting at POP3 server
5186 Receiving data from POP3 server
5187 Written message to database
5188 Received %1 bytes
5189 [%1] Finished receiving mail
5190 Disconnected from POP3 server [%1]
5191 Disconnected from POP3 client
5192 Decoded %1 of %2 bytes
5193 Mail Gateway Window
5194 Talking to SMTP server...
5195 Sending message '%1' %2
5196 Talking to SMTP client...
5197 Receiving data from local client...
5198 Receiving data...
5199 Finished receiving local mail
5200 Finished receiving mail
5201 unsuccessful
5202 start
5203 ok
5204 failed
5205 cancelled
5206 unknown
5207 SENDING: attempting to send message '%1' to internet
5208 SENT: successfully sent message '%1' to internet
5209 SEND FAILED: failed to send message '%1' to internet
5210 RECEIVING: attempting to receive message '%1' from internet
5211 RECEIVED: successfully received message '%1' from internet
5212 RECEIVE FAILED: failed to receive message '%1' from internet
5213 RECEIVING: attempting to read message '%1' from database
5214 RECEIVED: successfully read message '%1' from database
5215 RECEIVE FAILED: failed to read message '%1' from database
5216 %1 responding to message '%2'
5217 Message '%1' forwarded to %2
5218 Message %1 forwarded to %2
5219 Read %1 of %2 bytes
5220 Written %1 of %2 bytes
5223 Connected to SMTP server, ready to send
5224 Connected to SMTP server
5225 Disconnected from SMTP server
5226 Connected to local SMTP client
5227 Connected to remote SMTP client
5228 Disconnected from SMTP client
5229 FROM %1, TO %2
5230 Sending data
5231 Sent %1 out of %2 bytes
5232 Failed to save workgroup record!
5233 Reading message
5234 Encoding data
5235 Added %1 digital IDs to the OfficeTalk digital ID store!
5236 No Digital IDs were added!
5237 Failed to add all digital IDs!
5238 Retrying in %1 seconds.
5239 Certificate Properties
5240 Failed to close debug output file!
5241 Failed to write to debug output file!
5242 Failed to create socket
5243 Failed to write the file %s
5244 The message '%s' could not be sent. The ISP returned the response: %s
5245 Refused connection
5246 Performing DNS lookup for '%1'
5247 DNS lookup for '%1' failed!
5248 Unable to find server for address(es)
5249 MX record configuration error: MX record points to local computer.
5250 High
5251 Normal
5252 Low
5253 Attempting dial-up connection (%1)
5254 Connected dial-up connection (%1)
5255 Failed to make dial-up connection (%1)
5256 Inbox
5257 Credentials failed
5258 SMTP communication error
5259 DNS server not responding
5260 The DNS server %s could not be contacted for at least %d minutes. Messages will not be sent while the DNS server is not responding.
5261 The DNS servers %s and %s could not be contacted for at least %d minutes. Messages will not be sent while the DNS servers are not responding.
17027 Welcome to the Shared Address Book plug-in for WorkgroupMail <%Version%>.
17028 This plug-in stores the names and addresses of all messages sent and received through WorkgroupMail.
17029 Users can then access these from their mail clients.
17030 The Shared Address Book plug-in is registered.
17031 The Shared Address Book plug-in is not registered.
17032 You have <%TrialPeriodDaysLeft%> day(s) left of your trial period.
17033 To register the Shared Address Book plug-in, click <a target="WorkgroupMail" href="%1">here</a>.
17034 The trial period has expired for the Shared Address Book plug-in.
17035 To purchase the Shared Address Book plug-in, click <a target="WorkgroupMail" href="%1">here</a>.
17036 There are <%AddressBookEntries%> entries in the address book.
17037 The LDAP service is switched off.
17038 In order for mail clients to be able to use the shared address book functionality, you must switch this on in the Shared Address Book plug-in settings property sheet.
19000 Virus Protection
19001 The WorkgroupMail VirusChecker plug-in cannot find the file %1. It expects to find this file in the %2 folder.
19002 The WorkgroupMail VirusChecker plug-in cannot find the file vscand.exe. It expects to find this file in the %1 folder along with the files: ENUVSCAN.DAT and VD0DE417.VDB.
19003 McAfee VirusScan returned an error code %1
19004 The WorkgroupMail VirusChecker plug-in cannot find the file scan.exe. It expects to find this file in the %1 folder.
19005 The WorkgroupMail VirusChecker plug-in cannot find the file %1.
19006 Norton AntiVirus (corporate edition)
19007 Norton AntiVirus 2001 (desktop edition)
19008 McAfee VirusScan
19009 Network Associates VirusScan
19010 %s has found a virus in the %s message [%s] and has quarantined the relevant portion of the message. For more details, refer to the log and the quarantine in %s.
19011 inbound
19012 outbound
19013 %s has found a virus in the %s message [%s]. WorkgroupMail has quarantined this message. For more details, refer to the log in %s.
19014 Virus alert!
19015 WorkgroupMail VirusChecker Plug-in
19016 VirusChecker plug-in trial period has expired!
19017 There was an error loading the VirusChecker plug-in properties page.
19018 none
19019 Settings
19020 You must provide a name for your virus checking engine!
19021 You must provide a valid path for your virus checking engine!
19022 VirusChecker Plug-in
19023 User Defined Virus Checker
19024 Sophos Anti-Virus
19025 Failed to load the Sophos Anti-Virus engine (SAVI)!
19026 The name of the virus is '%1'.
19027 <Unknown>
19028 You must specify a user to inform!
19029 You must specify a quarantine area to put quarantined messages into!
19033 Welcome to the VirusChecker plug-in for WorkgroupMail <%Version%>.
19034 This plug-in checks incoming and outgoing messages for viruses.
19035 Messages found with viruses are quarantined.
19036 VirusChecker Plug-in <%Version%>
19037 The VirusChecker plug-in is registered.
19038 The VirusChecker plug-in is not registered.
19039 You have <%TrialPeriodDaysLeft%> day(s) left of your trial period.
19040 To register the VirusChecker plug-in, click <a target="WorkgroupMail" href="%1">here</a>.
19041 The trial period has expired for the VirusChecker plug-in.
19042 To purchase a license for the plug-in click <a target="WorkgroupMail" href="%1">here</a>.
19043 The <%VirusCheckerProduct%> antivirus engine is used to check for viruses.
19044 If a virus is found, <%InformUser%> is informed of this.
19045 If a virus is found, no-one is informed of this.
19046 Virus checking is turned off.
19047 Symantec AntiVirus (corporate edition)
19048 Grisoft AVG v6
21001 Content Filtering
21002 MailScan Plug-in
21003 click
21004 here
21005 The trial period has expired for the MailScan plug-in.
21006 To purchase a license for the plug-in, click %1.
21007 Group
21008 Rule
21009 Would you like to add the extension you have just typed?
21010 %1 Content Filter Plug-in
21011 You must specify at least one action!
21012 Quarantine message
21013 Inform specific recipient with specific message
21014 Send specific message to sender
21015 Also send message to recipient
21016 Redirect message to recipient
21017 Inform intended recipients with specific message
21018 Add disclaimer
21019 Message contains profanities
21020 There was an error loading the MailScan plug-in properties page.
21021 Message contains specific words
21022 Message subject contains specific words
21023 Message body contains specific words
21024 Message sent from specific recipient
21025 Message sent to specific recipient
21026 Message contains more than a certain number of attachments
21027 Message greater than a certain size
21028 Message contains specific types of attachments
21029 Message has attachments whose filename contains specific words
21030 Message marked as a specific priority
21031 Message sent from MailScan
21032 Message sent to external recipient
21033 You must supply a name for the rule!
21034 [no attachments]
21035 Within time range
21036 Select the times that this rule is active for.
21037 MIME header field exists
21038 MIME header field contains value(s)
21039 Delete message
21040 You must supply at least one word to look for in the subject or body!
21041 You must supply at least one word to look for in the subject!
21042 You must supply at least one word to look for in the body!
21043 You must supply at least one from recipient!
21044 You must supply at least one to recipient!
21045 You must supply a number of attachments!
21046 You must supply a size!
21047 You must supply at least one attachment type!
21048 You must supply at least one word to look for in the attachment names!
21049 You must supply a priority!
21050 You must specify a MIME header field!
21051 You must supply at least one word to look for in the MIME header field!
21052 Invalid condition!
21053 specific words
21054 does not contain
21055 contains
21056 message
21057 message subject
21058 message body
21059 profanities
21060 not sent from
21061 sent from
21062 specific recipient
21063 specific message
21064 quarantine message
21065 not sent to
21066 sent to
21067 a certain number of
21068 or
21069 more than
21070 attachments
21071 a certain size
21072 greater than
21073 specific types of
21074 message has attachments whose filename
21075 not marked as
21076 marked as
21077 external recipient
21078 MailScan
21079 not within
21080 within
21081 time range
21082 time
21083 header field
21084 does not exist
21085 exists
21086 Sent From/Not Sent From
21087 &Sent from
21088 &Not sent from
21089 Sent To/Not Sent To
21090 &Sent to
21091 &Not sent to
21092 Marked As/Not Marked As
21093 &Marked as
21094 &Not marked as
21095 Within/Not Within
21096 &Within
21097 &Not within
21098 Exists/Does not exist
21099 &Exists
21100 &Does not exist
21101 Contains/Does Not Contain
21102 &Contains
21103 Does ¬ contain
21104 You must supply a recipient to inform!
21105 You must supply a subject for the message!
21106 You must supply a recipient to send the message to!
21107 You must supply a recipient to redirect the message to!
21108 You must supply text for the disclaimer!
21109 inform
21110 with
21111 send %1 to sender
21112 recipient
21113 also %1 message to %2
21114 redirect message to %1
21115 delete message
21116 inform intended recipients with %1
21117 disclaimer
21118 add %1
21119 Invalid direction!
21120 Check messages when they arrive.
21121 Check messages before sending.
21122 New Rule
21123 If
21124 Incoming
21125 Outgoing
21126 Quarantine messages containing profanities.
21127 Quarantine messages with specific words.
21128 Are you sure you wish to delete the selected rule?
21129 &Close
21130 Would you like to add the word you have just typed?
21131 send
21132 carbon copy
21133 blind carbon copy
21134 quarantine message to %1
21135 Check all messages.
21136 Strip attachments.
21137 strip attachments
21138 Message is signed.
21139 message is signed
21140 Message contains a virus.
21141 message contains a virus
21142 skip next %1 rules
21143 jump to %1
21144 Stop processing message.
21145 Skip next n rules.
21146 Jump to a rule
21147 stop processing message
21148 <invalid rule>
21149 You must supply a number of rules to skip!
21150 You must supply a rule to jump to!
21151 rule
21152 Move to public folder.
21153 Copy to public folder.
21154 You must supply a public folder to move the message to!
21155 You must supply a public folder to copy the message to!
21156 public folder
21157 move to %1
21158 copy to %1
21159 Add MIME header.
21160 Settings
21161 value
21162 MIME Value
21163 MailScan is unable to check a message for viruses.
21164 It was unable to copy the file.
21165 It was unable to create a temporary file.
21166 n
21167 add
21168 Message is junk mail.
21169 message is junk mail
21170 Recipient mailbox unknown.
21171 recipient mailbox unknown
21172 There is a potential loop with this rule! Would you like to add a condition so that this rule only executes if the message is not sent from the content filtering plug-in?
21173 Content Filtering plug-in trial period has expired!
21174 Do you wish to add the typed word to the list?
21175 a specific priority
21177 Run executable.
21178 Run script.
21179 You must specify an executable file to run!
21180 You must enter some script to run!
21181 executable
21182 run
21183 script
21184 Message sent to specific user or group member
21185 Message sent to local recipient
21186 local recipient
21187 Content Filtering Rules
21188 Welcome to the Content Filtering plug-in for WorkgroupMail <%Version%>.
21189 This plug-in lets you define rules to check the content of incoming and outgoing messages and take certain actions when a particular condition is met.
21190 Warning:
21191 You have rules with virus checking conditions defined but you have not purchased a license for the Virus Checker plug-in.
21192 As a result of this, any rules containing conditions that check for the presence of viruses will act as if the message is not infected with a virus.
21193 To purchase a license for the Virus Checker plug-in click <a target="WorkgroupMail_Plugin" href="%1">here</a>.
21194 To add or modify rules, double click on the Content Filtering item in the left-hand pane.
21195 The following rules have been defined:
24587 Received - checking for possible responder action
24588 Received - checking for possible forward action
24589 Received - adding to database
24590 There are %1 days remaining before your trial period expires.
24591 Your license has expired! Please visit us at %2 and purchase %1. When you do so you will be sent a keycode to re-enable %1 and turn your copy of WorkgroupMail into a fully licensed product.
24592 There are %1 days remaining before your extended trial period expires.
24593 Send/Receive
24594 Forwarding
24595 Address
24596 Unable to load data from file
24597 Data file does not exist
24598 Failed to load settings file %1!
24599 Failed to save settings file %1!
24600 Data not loaded
24601 You have defined more users than you have licenses for. Either delete some users or purchase more licenses from %1.
24602 You must supply a valid address!
24603 English (US)
24604 %1 cannot run as you have no active ISPs defined! Use the %1 administrator to define ISPs.
24605 Failed to read response file '%1'!
24606 Time Range
24607 Time
24608 Specify the range of times when it is permitted to connect to this ISP.
24609 &Close
24610 Disconnect from the dial-up service?
24611 Unknown
24612 This keycode cannot be used! Please contact support@workgroupmail.com quoting the code 5316.
24613 Public Folder
24614 Public Folders
24615 Quarantine Area
24616 Quarantine Areas
24617 Times
24618 Default Quarantine
24619 %1 cannot run as you have no active domains defined! Use the %1 administrator to define domains.
24620 Failed to automatically delete user: %1
24621 Failed to quarantine file %1.
24622 There is no response file for the responder '%1'!
24623 Not all plugins could be called.
24624 Failed to check file %1 with plugins.
24625 Failed to check message file with plugins.
24626 Re
24627 Responded with file %1.
24628 Failed to respond with file %1. Check that the file exists.
24629 The address %1 does not appear to be valid and has not been responded to.
24630 Reloading data
24631 The local mail servers could not be started! Check your interfaces in the settings property sheet.
24632 ISP is SMTP only & auto disconnect & time to check disconnect.
24633 ISP is not SMTP Only & Internet server not busy & auto disconnect.
24634 Trying to disconnect.
24635 Failed to create SpamCleanser update thread!
24636 Failed to open the Workgroup table. Please ensure that the database is a valid database. If necessary, re-run setup.
24637 Unable to determine the IP address of your computer. Ensure that you are not connected via dial-up networking to another network.
24638 Unable to load settings file WMData.dat!
24639 No IC servers are busy.
24640 IC server is connected.
24641 Disconnecting: Enabled with no prompt.
24642 Disconnecting: Enabled with prompt.
24643 Not disconnecting.
24644 Sent message '%1'.
24645 Received message '%1'.
24646 Failed to receive message '%1'.
24647 Connection timed out
24648 WorkgroupMail
24649 seconds
24650 minutes
24651 hours
24652 days
24653 Unable to remove user folder
24654 Unable to determine user folder name
24655 User has no ID
24656 Unable to save data to file
24657 Quarantined spam message
24658 Failed to quarantine spam message
24659 Home Edition
24660 Professional Edition
24661 Enterprise Edition
24662 Version
24663 Unable to unquarantine message '%1'
24664 Address blocked: %1
24665 and
24666 %1 Home Edition
24667 %1 Professional Edition
24668 %1 Enterprise Edition
24669 This quarantine area was created automatically. Unless specified otherwise, all quarantined items will be placed in this quarantine area.
24670 %1 Home Edition only supports one domain! Delete all but one domain and restart the service.
24671 Outblaze Business Mail Server
24672 Please visit us at %2 to purchase %1. When you do so, you will be sent a keycode to turn your copy of %1 into a fully licensed product.
24673 I am out of the office until <OutUntil>. I shall contact you upon my return.\n\nKind regards\n\n<UserName>\n
24674 Failed to send
24675 The local IP addresses are:
24676 User restricted from using IMAP
24677 organization
24678 family
24679 &%1 Name
24680 Unable to remove folder
24681 Quarantine area has no ID
24682 Public folder has no ID
24683 Sent Items
24684 WorkgroupMail
24685 Failed to export addresses!
24686 whole word
24687 Updating SpamCleanser Data
24688 Sent Messages
24689 Received Messages
24690 Failed to update the SpamCleanser registration status!
24691 SpamCleanser is now registered! You have 30-days in which to try SpamCleanser. To continue benefiting from SpamCleanser after this time, you must subscribe to the service. For more information, see http://www.workgroupmail.com/spamcleanser.asp.
24692 There was a problem registering SpamCleanser! Please try again later.
24693 SPAM
24694 You must supply an organization name that contains only 7-bit ASCII characters!
24695 and
24696 You must supply an SMTP server name that contains only 7-bit ASCII characters!
24697 You must supply a POP3 server name that contains only 7-bit ASCII characters!
24698 Failed to create public folder rule thread!
24699 Failed to create quarantine area rule thread!
24700 Read Access
24701 Create Access
24702 Edit Access
24703 Delete Access
24704 No Access
24705 Failed to load settings file %1! The error given was: %2
24706 You have already trialled SpamCleanser! To purchase a subscription to SpamCleanser please go to http://www.workgroupmail.com/purchase_spam_cleanser.asp.
25004 Mailing List
25005 Windows Sockets failed to initialize on this computer. This will prevent this computer running WorkgroupMail. You may need to re-install TCP/IP.
25006 You must supply an address of someone to invite to the mailing list!
25007 Name
25008 Members
25009 Are you sure you wish to delete the selected mailing list?
25010 Mailing List plug-in failed to process message!
25011 Mailing List plug-in trial period has expired!
25012 Mailing List Manager
25013 There was an error loading the Mailing List plug-in properties page.
25014 Holding Addresses
25015 Verified Addresses
25016 Holding Members
25017 Invitation
25018 Request
25019 Welcome
25020 Unsubscribe
25021 Suffix Details
25022 The Mailing List plug-in could not create the PendingMailings folder. No mailings will be sent.
25023 The Mailing List plug-in trial period has expired. No mailings will be sent.
25024 Failed to save settings!
25025 Joined
25026 &Add
25027 &Update
25028 &New
25029 &Cancel
25030 &Edit
25031 You must enter a name for the mailing list!
25032 You must enter a valid address for the mailing list!
25033 You must select a moderator!
25034 Select a user...
25035 Failed to invite person to mailing list!
25036 Mailing List Invitation
25037 You have been invited to join the mailing list '%1'.
25038 You must now confirm that you wish to join by replying to this message.
25039 Please reply, leaving the code below unchanged:
25040 If you do not wish to join this mailing list then you need do nothing and you will automatically be removed.
25041 Mailing List Request
25042 You have requested to join the mailing list '%1'.
25043 Mailing List Welcome
25044 Welcome to the mailing list '%1'.
25045 You are now a full member of the list.
25046 If you wish to unsubscribe from this mailing list at any time then please send a message to %1 with the subject UNSUBSCRIBE.
25047 Mailing List Unsubscribe
25048 You have been unsubscribed from the mailing list '%1'.
25049 Broadcast %1 messages to mailing list %2.
25050 Not all mailing list members could be sent to. Sent %1 out of %2 messages.
25051 Failed to broadcast message to mailing list %1.
25052 Mailing list subscription confirmation invalid
25053 Your attempt to confirm the joining of a mailing list '%1' has failed.
25054 Please reply to the original message sent from the mailing list including the unique code contained within that message.
25055 Mailing list is not a discussion forum
25056 You have sent a message to the mailing list '%1' which is not a discussion forum.
25057 The message will not be sent to the list members.
25058 Mailing List Plug-in
25059 Cannot set the count of an entry list
25060 The address of a mailing list cannot be set.
25061 Cannot set mailing list count.
25062 Incorrect password.
25063 You are not logged in.
25064 MailingList plug-in not registered.
25065 To remove yourself from this mailing list, please reply to this email\nmessage with a subject of UNSUBSCRIBE.
25066 You will be sent an unsubscribe confirmation email.
25067 You must supply a valid error return address!
25068 Mailing List Plug-in <%Version%>
25069 Welcome to the Mailing List plug-in for WorkgroupMail <%Version%>.
25070 This plug-in manages multiple mailing lists for any number of email addresses.
25071 The Mailing List plug-in is registered.
25072 The Mailing List plug-in is not registered.
25073 You have <%TrialPeriodDaysLeft%> day(s) left of your trial period.
25074 To register the Mailing List plug-in, click <a target="WorkgroupMail" href="%1">here</a>.
25075 The trial period has expired for the Mailing List plug-in.
25076 To purchase a license for the plug-in click <a target="WorkgroupMail" href="%1">here</a>.
25077 There are no mailing lists defined.
25078 The mailing lists are as follows:
25079 Name
25080 Address
25081 Members
25082 Holding Members
57664 Display program information, version number and copyright\nAbout